quintagroup.seoptimizer Install / Uninstall / Reinstall

Installation on buildout-based instance

If you are using zc.buildout and the plone.recipe.zope2instance recipe to manage your project, you can do this:

• Add quintagroup.seoptimizer to the list of eggs to install, e.g.:

For Plone 4 - in your buildout.cfg file write:

   [buildout]
   ....
   eggs =
        ...
        quintagroup.seoptimizer >=4.0

For Plone 3 - in your buildout.cfg file write:

   [buildout]
   ....
   eggs =
        ...
        quintagroup.seoptimizer >3.0,<4.0

• Tell the plone.recipe.zope2instance recipe to install a ZCML slug:

   [instance]
   ...
   zcml =
       quintagroup.seoptimizer

• Re-run buildout, e.g. with:

   $ ./bin/buildout

• Restart the Zope server, e.g with the following command in the terminal:

   $ ./bin/instance restart

• Install quintagroup.seoptimizer via ZMI portal_setup -> Import tab. Select quintagroup.seoptimizer from the list of available profiles and press Import all steps.

IMPORTANT

Starting from 3.0 release - quintagroup.seoptimizer package does not use overrides.zcml file. So please remove quintagroup.seoptimizer-overrides line from your buildout's ZCML area if it was there before.

Installation on traditional instance (not buildout)

To install quintagroup.seoptimizer into the global Python environment (or a workingenv), using a traditional Zope 2 instance, you can do this:

• Copy quintagroup folder to your instance /lib/python directory.
• Create a file called quintagroup.seoptimizer-configure.zcml in your instance /etc/package-includes directory. The file should only contain this:

   <include package="quintagroup.seoptimizer" file="configure.zcml" />

• Restart the Zope server, for example with the following command in the terminal:

   $ ./bin/zopectl restart

• Install quintagroup.seoptimizer via ZMI portal_setup -> Import tab. Select quintagroup.seoptimizer from the list of available profiles and press Import all steps.

Uninstallation

To uninstall quintagroup.seoptimizer - go to ZMI portal_setup -> Import tab. Select quintagroup.seoptimizer uninstall profile from the list of available profiles and press Import all steps.

Reinstallation

In case you want to update quintagroup.seoptimizer to a newer version in your buildout:

• Remove quintagroup.seoptimizer-overrides from buildout.cfg file's ZCML area if it is there (Starting from 3.0 release - quintagroup.seoptimizer package does not use overrides.zcml file any longer!!!)
• Upgrade quintagroup.seoptimizer to the newer version using buildout (Rerun the buildout to replace old package with a new one in your instance)
• Run the reinstall procedure: visit "Site Setup" -> "Add-ons" control panel in your Plone site, where you have to press quintagroup.seoptimizer button next to Upgrade. (The same can be done with quickinstaller via ZMI: at /portal_quickinstaller/manage_installProductsForm: check the seoptimizer box and press Reinstall button.) This is an essential step as new version of product can introduce new persistent settings and ways to migrate settings/content from old to new version.