===========================
Installation/Uninstallation
===========================
Installation
------------
To install quintagroup.plonecomments into the global Python environment (or a workingenv),
using a traditional Zope 2 instance, you can do this:
* Copy ``quintagroup`` folder to the ``/path/to/instance/lib/python`` directory.
* Creare a file called ``quintagroup.plonecomments-configure.zcml`` in the
*/path/to/instance/etc/package-includes* directory. The file should
only contain this::
* Create a file called ``quintagroup.plonecomments-overrides.zcml`` into the */path/to/instance/etc/package-includes* directory. The file should
only contain this::
* Restart the Zope server, for example, with the following command in the terminal::
$ ./bin/zopectl restart
Alternatively, if you are using zc.buildout and the plone.recipe.zope2instance
recipe to manage your project, you can do this:
* Add ``quintagroup.plonecomments`` to the list of eggs to install, e.g.::
[buildout]
...
eggs =
...
quintagroup.plonecomments
* Tell the plone.recipe.zope2instance recipe to install a ZCML slug::
[instance]
recipe = plone.recipe.zope2instance
...
zcml =
quintagroup.plonecomments
quintagroup.plonecomments-overrides
* Re-run buildout, e.g. with::
$ ./bin/buildout
* Restart the Zope server, for example, with the following command in the terminal::
$ ./bin/instance restart
* Install quintagroup.plonecomments via ZMI portal_setup. Select ``quintagroup.plonecomments``
from the list of available profiles and press *Import all steps*.
**Atention**: If you are using a Plone version **before** 3.1 you need to install
"plone.browserlayer":http://pypi.python.org/pypi/plone.browserlayer (which also
requires a "GenericSetup":http://pypi.python.org/pypi/Products.GenericSetup version
greater than 1.4) in your Plone site. It shows up as **Local browser layer support**
in the Plone Add-on Products Control Panel.
Uninstallation
--------------
* To uninstall quintagroup.plonecomments - select ``quintagroup.plonecomments uninstall``
profile from the list of available profiles and press *Import all steps*.