=========================== Installation/Uninstallation =========================== Installation ------------ To install quintagroup.plonecomments into the global Python environment (or a workingenv), using a traditional Zope 2 instance, you can do this: * Copy ``quintagroup`` folder to the ``/path/to/instance/lib/python`` directory. * Creare a file called ``quintagroup.plonecomments-configure.zcml`` in the */path/to/instance/etc/package-includes* directory. The file should only contain this:: * Create a file called ``quintagroup.plonecomments-overrides.zcml`` into the */path/to/instance/etc/package-includes* directory. The file should only contain this:: * Restart the Zope server, for example, with the following command in the terminal:: $ ./bin/zopectl restart Alternatively, if you are using zc.buildout and the plone.recipe.zope2instance recipe to manage your project, you can do this: * Add ``quintagroup.plonecomments`` to the list of eggs to install, e.g.:: [buildout] ... eggs = ... quintagroup.plonecomments * Tell the plone.recipe.zope2instance recipe to install a ZCML slug:: [instance] recipe = plone.recipe.zope2instance ... zcml = quintagroup.plonecomments quintagroup.plonecomments-overrides * Re-run buildout, e.g. with:: $ ./bin/buildout * Restart the Zope server, for example, with the following command in the terminal:: $ ./bin/instance restart * Install quintagroup.plonecomments via ZMI portal_setup. Select ``quintagroup.plonecomments`` from the list of available profiles and press *Import all steps*. **Atention**: If you are using a Plone version **before** 3.1 you need to install "plone.browserlayer":http://pypi.python.org/pypi/plone.browserlayer (which also requires a "GenericSetup":http://pypi.python.org/pypi/Products.GenericSetup version greater than 1.4) in your Plone site. It shows up as **Local browser layer support** in the Plone Add-on Products Control Panel. Uninstallation -------------- * To uninstall quintagroup.plonecomments - select ``quintagroup.plonecomments uninstall`` profile from the list of available profiles and press *Import all steps*.