[2970] | 1 | Introduction |
---|
| 2 | ============ |
---|
[1162] | 3 | |
---|
[2980] | 4 | Quintagroup Search Engine Optimization Tool (quintagroup.seoptimizer) |
---|
| 5 | was created to enhance SE visibility of Plone sites. |
---|
[1162] | 6 | |
---|
[3053] | 7 | .. figure:: http://quintagroup.com/services/plone-development/products/qSEOptimizer/plone-seo.png |
---|
[1162] | 8 | |
---|
| 9 | quintagroup.seoptimizer allows per document editing of: |
---|
| 10 | |
---|
| 11 | * HTML Title tag |
---|
| 12 | |
---|
| 13 | * META description tag |
---|
| 14 | |
---|
| 15 | * META keywords tag |
---|
| 16 | |
---|
| 17 | * HTML comment into page header |
---|
| 18 | |
---|
| 19 | * META robots tag |
---|
| 20 | |
---|
| 21 | * META Disposition tag |
---|
| 22 | |
---|
[2970] | 23 | * Canonical URl http://projects.quintagroup.com/products/wiki/qSEOptimizer#CanonicalURL |
---|
[1165] | 24 | |
---|
[2943] | 25 | For Title, description keywords and comment you have statistics (total/stop/used words, field length counter). |
---|
[2970] | 26 | |
---|
| 27 | IMPORTANT |
---|
| 28 | --------- |
---|
| 29 | |
---|
| 30 | **Starting from 3.0 release - quintagroup.seoptimizer package does not need 'overrides.zcml' file. So please remove 'quintagroup.seoptimizer-overrides' line from your buildout's ZCML area.** |
---|
[1162] | 31 | |
---|
| 32 | Usage |
---|
| 33 | ----- |
---|
| 34 | |
---|
[1165] | 35 | * Go to Plone Control Panel, enable Plone SEO for desired content types |
---|
[1162] | 36 | |
---|
[1165] | 37 | * Go to a document (Blog entry, news item, event, etc) |
---|
| 38 | |
---|
[1162] | 39 | * Switch to *SEO Properties* tab |
---|
| 40 | |
---|
[1165] | 41 | * Select *Override* checkboxes of features you want to override |
---|
[1162] | 42 | |
---|
| 43 | * Type-in your SEO values |
---|
| 44 | |
---|
[2141] | 45 | * Save changes |
---|
[1162] | 46 | |
---|
| 47 | * Do this for all documents that need enhanced SEO properties |
---|
| 48 | |
---|
[1165] | 49 | |
---|
[1162] | 50 | Requirements |
---|
| 51 | ------------ |
---|
| 52 | |
---|
[2970] | 53 | * Plone 3.x, Plone 4 |
---|
[1162] | 54 | |
---|
[2937] | 55 | quintagroup.seoptimizer requires plone.browserlayer package to be installed in your site. plone.browserlayer package is shipped with Plone >= 3.1 and thus you don't need anything extra when you have that version of Plone. |
---|
| 56 | |
---|
| 57 | But for Plone 3.0.x < 3.1 the process looks like this: |
---|
| 58 | |
---|
[2944] | 59 | * if you are creating a new Plone site and want it to support Quintagroup Search Engine Optimization Tool, just select 2 extension profiles Local browser layer support and quintagroup.seoptimizer profile in 'Extension Profiles' when adding a new Plone site; |
---|
| 60 | * if you want to add quintagroup.seoptimizer to already-existing Plone site, you need to apply Local browser layer support extension profile and then quintagroup.seoptimizer profile. You can do it either in portal_setup/Import or in portal_quickinstaller by simple installation procedure. |
---|
[2937] | 61 | |
---|
[2943] | 62 | In Plone 3.1 you can simply install quintagroup.seoptimizer profile in portal_quickinstaller without need of prior installation of Local browser layer support (that is not available for installation anyway, since it is a part of core system). |
---|
[2937] | 63 | |
---|
[2943] | 64 | IMPORTANT! For Plone 3.0.x you should use plone.browserlayer 1.0.rc3. Be sure to define the right version of plone.browserlayer in your buildout.cfg. For Plone 3.1.x just use the version you have. |
---|
[2937] | 65 | |
---|
| 66 | |
---|
[2475] | 67 | Notes |
---|
| 68 | ----- |
---|
[1166] | 69 | |
---|
[2475] | 70 | * For Plone 4 versions - use Plone SEO 4.0 release and up http://plone.org/products/plone-seo/releases/4.0. In your buildout.cfg file's egg section set product version:: |
---|
[1162] | 71 | |
---|
[2475] | 72 | [buildout] |
---|
| 73 | .... |
---|
| 74 | eggs = |
---|
| 75 | ... |
---|
| 76 | quintagroup.seoptimizer >=4.0 |
---|
[1162] | 77 | |
---|
[2475] | 78 | * For Plone 3 versions - use the latest Plone SEO 3.x release http://plone.org/products/plone-seo/releases/3.0.5. In your buildout.cfg file's egg section set product version:: |
---|
[1165] | 79 | |
---|
[2475] | 80 | [buildout] |
---|
| 81 | .... |
---|
| 82 | eggs = |
---|
| 83 | ... |
---|
| 84 | quintagroup.seoptimizer >3.0,<4.0 |
---|
[2139] | 85 | |
---|
[2475] | 86 | |
---|
| 87 | * For Plone 2.x versions - use Plone SEO 1.7.1 release http://plone.org/products/plone-seo/releases/1.7.1 |
---|
| 88 | |
---|
[2970] | 89 | |
---|
[2172] | 90 | Links |
---|
| 91 | ----- |
---|
| 92 | |
---|
[2970] | 93 | Watch Plone SEO screencast http://quintagroup.com/cms/screencasts/plone-seo to learn how to install and set up Plone SEO on a buildout-based Plone instance for Plone 3.2 or above. |
---|
[2172] | 94 | |
---|
| 95 | |
---|
[1162] | 96 | Authors |
---|
| 97 | ------- |
---|
| 98 | |
---|
| 99 | * Myroslav Opyr |
---|
| 100 | |
---|
[2970] | 101 | * Andriy Mylenkyy |
---|
[1162] | 102 | |
---|
[2970] | 103 | * Volodymyr Cherepanyak |
---|
[1162] | 104 | |
---|
| 105 | * Vitaliy Podoba |
---|
| 106 | |
---|
| 107 | * Taras Melnychuk |
---|
| 108 | |
---|
[2970] | 109 | * Mykola Kharechko |
---|
| 110 | |
---|
[1162] | 111 | * Vitaliy Stepanov |
---|
[1165] | 112 | |
---|
[2970] | 113 | * Volodymyr Romaniuk |
---|
[1166] | 114 | |
---|